Glass canopy
SDL Acubis

Filigree profiles, maximum transparency, perfect for cubic structures

The internal structural members of the non-isolated aluminium profile system lend the roof a breezy elegance. The 2° roof pitch is barely visible to the naked eye, but is enough to ensure that water drains off the roof area perfectly. A flat, one-piece wall joint ensures visual lightness and also enables simple installation on the construction site.

German Design Award Special 2019

FLAT ROOF IN PURISTIC DESIGN

The glass canopy SDL Acubis, which was added to the Solarlux product portfolio this year, receives the "Special Mention" award of the German Design Award.

Kubisches Terrassendach aus Aluminium. Filigran und transparent. SDL Acubis

Filigree and transparent

The Solarlux glass canopy system SDL Acubis is a non-insulated aluminium profile system with internal statics. The use of profiles specially developed for this application area enables filigree constructions to be achieved. Areas of application are open, partially closed and closed glass canopies and non-insulated glass houses.

Design features

Different versions of the system are available:

  • Designed as a monolith or pitched roof..
  • The roof is drained by means of a gutter. Concealed drainage or emergency drainage is possible in the supports.
  • Detached construction or construction connected to the house architecture can be executed by means of a wall joint
  • The one-piece wall connection allows easy installation. The rafters are screwed directly to the wall joint.
  • The roof always has a pitch of 2°.
  • Depending on the version, three- or four-sided all-round screen only 253 mm in height
  • Single glazing made of laminated safety glass with 8, 10 or 12 mm glass thickness is used.
  • The powder-coated and rounded Solarlux aluminium system profiles form a harmonious unit. The design is timelessly elegant
  • The extensive range of profiles allows building-related selection according to size and static requirements. Steel reinforcements can be inserted into the slots in the load-bearing profiles. This allows large roof constructions and maximum opening and span widths.
  • The supports can be retracted from the end of the eaves, allowing optimum static use of the profile cross-sections. The positioning of the supports is variable.
  • Glass canopy lighting can be elegantly implemented using spotlights that can be integrated into the rafters. The cable routing is concealed by a cable duct in the wall joint.
  • Both an underglass awning and vertical shading are optionally available for the system.
 
Technik und Downloads zum Terrassendach

Technical details & Downloads

Comprehensive information material and technical documents on products and systems can be found in our portal "mySolarlux". Or request a brochure directly.

Order brochure

Inspirationen

  

Do you have any questions or would you like to order a free brochure? We will be happy to support you in planning to modernise your existing building or to realise your new one. We look forward to hearing from you.

Contact

Solarlux Systems Limited
5 Quadrant Park
Mundells,
Welwyn Garden City,
Hertfordshire
AL7 1FS

Tel: +44 1707 339970

E-Mail: info@solarlux.co.uk


Internet: www.solarlux.co.uk

back to top